30A87 - 00060 Fuel Shut Off Shutdown Solenoid Engine S3L S4L K3E Flameout Solenoid Valve

30A87 - 00060 Fuel Shut off Shutdown Solenoid Engine S3L S4L K3E Flameout Solenoid Valve
 
 
Specifiion

 
 
Description

When the diesel engine is turned off, there is a coil in the solenoid valve that is the same as that of the generator. When the power is turned on, a magnetic force is generated to pull the shutdown switch back to the oil. When the power is off, there is no magnetic force. oil. After the flameout solenoid valve is used for a long time, the piston is easily blocked by dust and dirt and cannot move, and then there is a phenomenon that the flameout solenoid valve cannot be started or extinguished.

Solenoid valve installation note

1. When installing, it should be noted that the arrow on the valve body should be consistent with the flow direction of the medium. Do not install in places where there is direct dripping or splashing. The solenoid valve should be installed vertically upwards;
2. The solenoid valve should be guaranteed to work normally within the fluctuation range of the power supply voltage of 15%-10% of the rated voltage;
3. After the solenoid valve is installed, there must be no reverse pressure difference in the pipeline. And it needs to be powered on several times to make it suitable for temperature before it can be officially put into use;
4. The pipeline should be thoroughly cleaned before installing the solenoid valve. The incoming medium should be free of impurities. Install filter before valve;
5. When the solenoid valve fails or is cleaned, in order to ensure the continuous operation of the system, a bypass device should be installed.

More Product