437-2617 Stop Solenoid Valve 12V 2370-12E2U1B5S For Perkins Diesel Fuel Engine Stop Solenoid

437-2617 Stop Solenoid Valve 12V 2370-12E2U1B5S For Perkins Diesel Fuel Engine Stop Solenoid

Specifiion

Description

A Stop solenoid is used to cut the fuel supply to the engine when the ignition is switched off. Stop solenoid fits into the diesel distribution pump and can be a cause for diesel systems to fail. When the solenoid is turned on the plunger pulls the valve which allows fuel to pass through.Common signs of stop solenoid failure are: non-starting, non-stopping or running on after ignition has been turned off.

An engine stop solenoid is an electromagnetic device designed to cut the fuel supply to an engine to force it to stop. Most mechanical engines have stop solenoids fitted.
An engines stop solenoids normal state is not energized (i.e. there is no power to it). In this state most solenoids are in the closed position, so the fuel cannot get past. Before the engine starts, the solenoid is energized, which opens the flow of fuel to the engine. The engine then cranks and should start. When you stop the engine, the power to the stop solenoid is removed, which closes the fuel line and the engine then stops.

Characteristic

1. The solenoid valves must be resistant to all the proposed media used within in the appliion
2. The solenoid valves must be able to cope with both high and low temperatures
3. The solenoid valve materials and material combinations must meet the quality requirements on-site
4.The solenoid valve materials must meet the required corrosion resistance

5.The solenoid valves must be precise, accurate and repeatable

More Product